A novel approach for determining instantaneous centers of rotation of the mandible with an intraoral scanner: A preliminary study.

Abstract

<h4>Objectives</h4>Recording and reproducing mandibular movements have been of key importance in the practice of dentistry for over a century. Recently, it has become possible to use digital technologies for these tasks. This study presents a preliminary method to try to identify the mandibular instantaneous centres of rotation based solely on intraoral scanners.<h4>Methods</h4>The dentitions of four participants were scanned, multiple inter-occlusal registrations and buccal scans were performed in closed and opened positions. Blender software was used to align the meshes during the post-scan digital workflow. Bite alignment accuracy was assessed and then improved with a strict exclusion protocol. An automated algorithm was used to find rotations between closed stage and open stage meshes.<h4>Results</h4>Our exclusion protocol reduced the bite alignment error significantly (p = 0.001) and the root-mean-square error value of the meshes decreased from 0.09 mm (SD = 0.15) to 0.03 mm (SD = 0.017). However, the remaining translational error caused an unexpectedly large shift in the axis of rotation (mean = 1.35 mm, SD = 0.77) with a 41.83: 1 ratio. As found in other studies, our results showed even a small amount of error during registration can shift the axis of rotation a large amount. This phenomenon will compromise the results of common pantographic methods which assume a rotation axis of the condyle. It also adds valuable information to the concept of instantaneous centers of rotation by revealing their true characteristics.