Comparative Study of Granite and Expanded Clay Aggregate as Backfill Materials for Masonry Vaults.

Abstract

The paper presents the results of experimental and numerical tests on barrel vaults with backfill material. The thickness, internal span, and rise of the vaults were 125 mm, 2000 mm, and 730 mm, respectively. In experimental studies, vaults with backfill of expanded clay aggregate or granite aggregate were tested. Moreover, three types of extrados finishing were considered in the experiments: masonry with flush joints, PVC film, and steel angles attached to the bricks. The numerical simulations increased the number of cases analyzed by conducting a parametric analysis for four additional backfill materials with varying bulk density or internal friction angle, as well as modifying the friction coefficient at the backfill-vault interface for each of the analyzed materials. The main goal of the analyses was to investigate the impact of the bulk density, the internal friction angle of the backfill material, and the friction coefficient between the backfill and the vault on the load-bearing capacity of the buried vault. Both the laboratory tests and numerical simulations indicate a significant impact of the internal friction angle, bulk density of the backfill materials, and the finishing method of the extrados of the vault on the load-bearing capacity of buried vaults.