Comparison of traditional statistical quality control using commercially available control materials and two patient-based quality control procedures for the ADVIA 120 Hematology System.

Abstract

BACKGROUND: Quality control procedures are an important part of the overall quality assurance for production of accurate and reliable hematologic results. OBJECTIVES: This study aimed to validate a quality control material-based procedure and assess two patient-based quality control procedures (repeat patient testing [RPT] and average of normals [AoN]) with the ADVIA 120 Hematology System. METHODS: Requirements for quality control procedures were obtained with the computerized statistical and quality program, EZRules3. The procedures were evaluated comparing the probability of error detection (Ped), probability of false rejection (Pfr), and sigma metrics. RESULTS: All three of the quality control procedures could be applied with 1-3s control rules, achieving the desired quality requirements. Validation of the quality control materials achieved values for Ped and Pfr of ≥90% and 0%, respectively. Patient-based procedures obtained a ≥85% Ped and a 0% Pfr, except for platelets in the AoN procedure, which achieved a 77% Ped. The RPT achievable total errors were similar to those of the traditional quality control materials and the AoN procedures, except for platelets, which had an achievable total error of 75%. CONCLUSIONS: Patient-based procedures are suitable for veterinary laboratories. The RPT approach may benefit laboratories with limited budgets and low hematology caseloads. The AoN procedure may benefit laboratories with higher hematology caseloads.