Experimental Determination of the Equivalent Moment of Inertia and Stresses of Aluminium Profiles with Thermal Breaks.

Abstract

This paper presents the results of experimental tests and computer simulations on the stiffness of composite aluminium mullions used in unitised façades. The elements analysed were subjected to bending in order to simulate the actual operating conditions of aluminium façades subjected to significant wind pressure or suction loads. The basic mechanical and physical properties of the materials from which the analysed type of aluminium façade is made (Aluminium EN AW-6060 in the T66 temper and polyamide PA66 25GF), the test method, and the results obtained are described. As a result of the tests, equivalent moments of inertia of the composite profile (aluminium profile with the thermal break) were determined, which are strongly dependent on the strength of the connection between the individual elements, the asymmetry of the cross-section, and the properties of the thermal break. Strain measurements carried out using FBG (Fiber Bragg Grating) strain sensors installed in the profiles under tests allowed for determining the actual stress values of the aluminium profiles under consideration. The results obtained were compared to theoretical (numerical) values, indicating discrepancies at higher load values. The methodology presented in this article is to be used to monitor the deformation of the aluminium façade mullions of HRB (High-Rise Buildings).