Experimental Study on the Bending Behaviour of GFRP Laminates Repaired with Stainless-Steel Wire Mesh.

Abstract

This study experimentally investigates the use of stainless-steel woven wire mesh (SSWWM) as a patch material for repairing damaged glass fibre-reinforced (GFR) composite laminates. The effects of several factors on the three-point bending (3PB) behaviour of the parent laminate were examined, including the repair method (the plugging of open hole and the external patch repair), the mesh count of the SSWWM, and the number of SSWWM layers. According to the findings, all parameters considered in this study play a pivotal role in 3PB behaviour. Employing SSWWM as a patch material can recover 66.02-129.2% of the undamaged 3PB failure load, depending on the repair method, mesh count of the SSWWM, and number of SSWWM layers. Overall, decreasing the mesh count and increasing the number of SSWWM layers and applying an external patch repair method yield better results in terms of failure load and patch efficiency. This can be attributed to the increased wire diameter, improved bending rigidity, and better load distribution over a wider area. The SSWWM bridges the damaged zone, ensuring effective load transfer between the patch and parent laminate while preventing crack propagation. Utilising SSWWM as a patch material provides a quick, reliable solution for damage scenarios in engineering applications.