Generation of Randomly Inclined Fibers in the Representative Volume Element for Predicting the Elastic Modulus of Fiber-Reinforced Polymer Composites.

Abstract

The representative volume element (RVE) is frequently used to forecast the mechanical properties of composites, where the distribution of fibers plays a significant role. This paper proposes a new RVE modeling method for unidirectional fiber-reinforced polymer (UD-FRP) composites, which takes into account the random distribution of fiber positions and inclinations. The fiber inclination in the RVE is normally or uniformly distributed. The suggested RVE model was validated using static tests and the fiber structure observed by micro-computed tomography (CT). The effects of fiber volume fraction and maximum fiber inclination on the elastic properties were investigated based on the proposed RVE model. The results indicate that the prediction of transverse properties is considerably impacted by fiber inclination in RVE, with uniformly distributed inclination having a more significant influence than normally distributed inclination. For the transverse Young's modulus of UD-FRP, the predicted results of the proposed model and the models in the literature differed from the experimental results by 0.30% and 11.45%, respectively. For the in-plane shear modulus of UD-FRP, the predicted results of the proposed model and the models in the literature differed from the experimental results by 1.65% and 8.44%, respectively. Moreover, the fiber volume fraction has a significant effect on the elastic properties, and the maximum inclination of the fibers has a significant effect on the elastic properties except for the longitudinal Poisson's ratio. The proposed RVE model in this paper can predict the elastic properties of composites more accurately.